Flat Roof Skylight Installation in Toronto. Daylight Done Right. Sealed for Decades.
A skylight is a hole in your roof — and on a flat roof, the difference between beautiful daylight and a rotted deck is one detail: the curb flashing, built to your flat roof system's manufacturer requirements. That's our specialty, on every brand and every size.
Get a Skylight Quote Call 416-826-1334When skylights leak, they leak a lot.
Skylights on flat roofs are installed by all kinds of contractors — window installers, general renovators, shingle roofers. And unfortunately, when a skylight installation leaks, it rarely drips politely: it leaks a lot, straight into your ceiling, and often quietly for months first.
The reason is almost always the same: the installer wasn't skilled in flat roof systems and manufacturer requirements. A flat roof membrane must tie into the skylight curb in a very specific sequence, with system-matched materials — and installers who don't live in flat roofs improvise it.
The classic story: a "small" leak, ignored — then ceiling marks appear, and by the time we open it up, the deck around the skylight is rotted.
We've rebuilt enough of these to know exactly what a skylight installation needs to never become that story.
It's almost never the skylight.
When water shows up under a skylight, everyone blames the unit — the glass, the seals, the frame. In reality, skylights themselves very rarely leak. Modern units from quality manufacturers are factory-sealed and tested; the glass is the most reliable part of the whole assembly.
In most cases the real failure is the curb flashing — the membrane and metal work where the skylight meets the roof, done without the flat roof system's required sequence, primers, or laps. Homeowners replace perfectly good skylights and keep the bad flashing… and the leak stays.
Our diagnostic starts at the curb, where the answer almost always is — the same evidence-first approach as our leak detection service.
The skylight unit — glass, seals, frame. Factory-sealed, tested, and in most cases completely watertight. Replacing it changes nothing when the flashing is the failure.
The curb flashing — membrane tie-in, laps, primers, and metal work at the curb, skipped or improvised by installers who don't know flat roof systems and manufacturer requirements.
From a sun tube to a wall of sky.
We install the full range — and because we order directly from our manufacturers, size is never a limitation:
Compact tubes that pipe daylight into hallways, bathrooms, and closets — minimal roof opening, maximum light, perfectly flashed into the membrane.
Fixed and venting units from the classic 2×2 up through every standard size — curb-mounted on your flat roof with the full manufacturer-spec flashing detail.
Oversized and custom skylights ordered directly from our manufacturers to your exact opening — engineered curbs, structural framing coordinated, and detailed for decades.
VELUX. FAKRO. Columbia. Installed the flat-roof way.
We install and service every major skylight brand — each to its own manufacturer requirements and your flat roof system's requirements, because the warranty only holds when both are met:
The world leader in skylights — fixed, venting, and flat-roof-specific units. We install VELUX to full spec, including their curb and flashing systems.
European engineering with excellent flat roof windows and domes — installed with the membrane tie-ins their documentation demands.
Canadian-made units built for our climate, from standard sizes to custom orders — a direct-order manufacturer for our custom large installs.
Plus other quality manufacturers on request — the right unit for your roof, never inventory we need to move.
Built like a roof detail — because that's what it is.
Opening located for light and framing — structural members respected or properly headered, condensation and ventilation considered from day one.
The curb constructed to the skylight manufacturer's height and dimension requirements — the foundation every leak-free skylight sits on.
Your flat roof system's exact sequence: primers, laps, and metal work per manufacturer requirements — the detail everyone else improvises.
Flooded and tested on the spot, then independent inspection — and you pay only after it passes.
Skylight installation questions
My skylight is leaking — do I need a new skylight?
Probably not. Skylights themselves very rarely leak — modern units are factory-sealed and tested. In most cases the real failure is the curb flashing: the membrane tie-in where the skylight meets the roof, done without the flat roof system's required sequence. We diagnose the curb first, because replacing a good skylight over bad flashing leaves you with the same leak and a bigger bill.
Why do flat roof skylights leak more than sloped-roof ones?
They don't — badly installed ones do. Flat roof skylights are usually installed by contractors not skilled in flat roof systems and manufacturer requirements, and water sits at the curb instead of running off. When those installations fail, they fail big: hidden leaks that rot the deck and stain ceilings before anyone notices. Installed to spec by a flat roof specialist, a skylight is as reliable as any other roof detail.
What sizes can you install?
Everything — sun tubes and tubular skylights, standard units from 2×2 up, and custom large skylights of any size ordered directly from our manufacturers, with engineered curbs and coordinated structural framing.
Which skylight brands do you work with?
All major brands — VELUX, FAKRO, Columbia Skylights, and other quality manufacturers on request. Each installed to both the skylight maker's requirements and your flat roof membrane manufacturer's requirements, so both warranties hold.
Can you add a skylight to my existing flat roof?
Yes — retrofit installations are routine for us. The opening is framed properly, the curb built to spec, and the new flashing tied into your existing membrane with system-matched materials. During a replacement is the ideal moment, but a well-executed retrofit is watertight either way.
My ceiling has marks around the skylight — how bad is it?
Ceiling marks mean the leak has been running for a while — and the deck around the skylight may already have rot. We open the curb, assess the deck honestly, repair what's damaged, and rebuild the flashing to spec. Caught now, it's a repair; ignored longer, it becomes structural.